Declarations of conformity with UPS harmonized standards and directives EN 62040-1 (Safety) and
62040-2 (EMC) are available at
http://powerquality.eaton.com or by contacting your nearest Eaton office or
authorized partner.
22..44 UUsseerr pprreeccaauuttiioonnss
The only permitted user operations are:
• Startup and shutdown of the UPS, excluding the commissioning startup.
• Use of the LCD control panel.
Obey the precautions and do only the described operations. Do not deviate from the instructions. It can be
dangerous to you or cause an accidental load loss.
CAUTION
Electric energy hazard. Do not remove any other screws than those holding the
connecting plates and the MBS locking panel.
CAUTION
If the product is used in a C2 environment, take additional measures to further
suppress electromagnetic interference. This product is intended for commercial
and industrial application in a C3 environment.
22..55 AAuuddiieennccee
The intended audience of this document are as follows:
• People who plan and do the installation of the UPS
• People who use the UPS
This document provides guidelines for how to examine the UPS delivery and how to install and operate
the UPS.
The reader is expected to know the fundamentals of electricity, wiring, electrical components and
electrical schematic symbols. This document is written for a global reader.
CAUTION
Read this document before you start to operate or do work on the UPS.
EATON 93T USER’S AND INSTALLATION GUIDE 614-40270
-
December 2023 www.eaton.eu 1144
To Next Page
Loading...
