Figure 54. Password page
CChhaannggee CCoonnttrrooll PPaasssswwoorrdd
The Change Control Password page is used to change the password for accessing the Control page.
To change the Control page password, select Enable Control Password. As a result, a keyboard and a
password input field appear. Enter the old password and the new password. Then, select OK.
If the new password is verified, the New Password Saved prompt appears. If the entered password is
wrong, the Wrong Old Password prompt appears, which indicates that you must re-enter your password.
CChhaannggee SSeettttiinngg PPaasssswwoorrdd
The Change Setting Password page is used to change the password for accessing the Setting page.
To change the Setting page password, tap on the keyboard on the right side of the page. Enter the old
password and the new password. Then, select OK.
If the new password is verified, the New Password Saved prompt appears. If the entered password is
wrong, the Wrong Old Password prompt appears, which indicates that you must re-enter your password.
66..22..11..1100 SSeerrvviiccee rreemmiinnddeerr
When a service expires, the Service Maintenance Reminder icon is displayed on the Home page.
There are four types of service reminders:
1. Preventive maintenance reminder
2. Battery replacement reminder
3. Capacitor replacement reminder
4. Fan replacement reminder
To access the Service Maintenance Reminder page, tap on the Service Maintenance Reminder icon.
A red prompt indicates that the reminder is expired. A gray prompt indicates that the reminder is not
expired or that the reminder is not enabled.
EATON 93T USER’S AND INSTALLATION GUIDE 614-40270
-
December 2023 www.eaton.eu 7755
To Next Page
Loading...
