alarm, examine first the indicator lights to identify the cause of the alarm. For more information on the
status indicator lights, refer to Section
6.2.1.1 Status indicator lights
UUPPSS ssttaattuuss bbaarr
The UPS status bar displays active alarm information. For the location of the status bar, refer to Figure
35: Home page. Tap on the status bar to access the Log page and view active alarm information. For
more information on the Log page, refer to Section
6.2.1.7 Log page.
66..22..11..33 UUssiinngg tthhee ttoouucchh ssccrreeeenn
The touch screen on the control panel provides an operating interface for the UPS system.
Figure 35. Home page
A The UPS status bar displays the model of the Eaton equipment, current date, time, and active
log information.
B The energy flow diagram displays information about the energy flow status of the UPS
operation.
C Tap on the Menu icon to access information on the UPS meters, system control, logs,
system, and settings.
D The current operating mode of the UPS, total kVA and kW, and their respective percentages.
Tap on this area to access detailed three-phase data.
66..22..11..44 UUsseerr mmeennuu
To access the Menu page, tap on the icon at the bottom of the Home page. The basic structure of the
Menu page is shown in Table
12: Menu functions.
EATON 93T USER’S AND INSTALLATION GUIDE 614-40270
-
December 2023 www.eaton.eu 6633
To Next Page
Loading...
