Action Yes No
The surrounding area of the UPS installation site is clean and free
of dust. It is recommended that the UPS is installed on a level floor
suitable for computer or electronic equipment.
Air conditioning equipment is installed and operating correctly.
There is sufficient workspace around the UPS and other cabinets.
Sufficient lighting is provided around all the UPS equipment.
A 220 VAC power supply socket is located within 7.5 meters of the
UPS equipment.
Start-up and operational checks are performed by an authorized
Eaton Customer Service Engineer.
55..66..22 PPaarraalllleell UUPPSS ssyysstteemm
Action Yes No
Each cabinet in the UPS system is placed in its installation location.
None of the cabinets is placed below the air outlet of an air
conditioner.
All conduits and cables are properly routed to the UPS.
All power cables are properly sized and terminated.
The neutral line is installed between the cabinets according to the
requirements.
The ground cable is correctly installed.
The parallel wiring is correctly installed between the UPS units.
The gaps between the cables and the cabinet are filled with
fireproof mud.
There is sufficient workspace around the UPS and other cabinets.
Sufficient lighting is provided around all the UPS equipment.
A 220 VAC power supply socket is located within 7.5 meters of the
UPS equipment.
The positive, negative, and neutral battery cables are correctly
installed.
The external battery switch is turned off.
An alarm label is attached to the external battery switch.
Start-up and operational checks are performed by an authorized
Eaton Customer Service Engineer.
EATON 93T USER’S AND INSTALLATION GUIDE 614-40270
-
December 2023 www.eaton.eu 6600
To Next Page
Loading...
