Figure 22. Connector locations (60–80 kVA)
1. L1 (input)
2. L2 (input)
3. L3 (input)
4. L1 (bypass)
5. L2 (bypass)
6. L3 (bypass)
7. L1 (output)
8. L2 (output)
9. L3 (output)
10. Neutral
11. Neutral
12. Battery +
13. Battery neutral
14. Battery -
15. Grounding screw
55..33 IInnssttaalllliinngg tthhee bbaatttteerryy ssyysstteemm
DANGER
This UPS may have external batteries. The batteries are designed to deliver a
large amount of energy and an incorrect connection may lead to a short circuit
and cause serious injuries to the personnel or damages to the equipment. In
order to avoid damages to the equipment or injuries to personnel, only
commissioning personnel are allowed to perform the connection of these
batteries.
EATON 93T USER’S AND INSTALLATION GUIDE 614-40270
-
December 2023 www.eaton.eu 4488
To Next Page
Loading...
