44..44 UUnnppaacckk aanndd iinnssppeecctt tthhee uunniittss
For the UPS system to operate at peak efficiency, the installation site must meet the environmental
parameters outlined in these instructions.
WARNING
The UPS cabinet is heavy. For more information on the weights, refer to Table
5: UPS cabinet dimensions and weights.
Do not stand in front of the pallet when you unload the cabinet.
Obey the loading and unloading instructions or the cabinet may fall and cause
serious personal injury.
CAUTION
Make sure that the forklift or pallet lift can support the cabinet's weight.
For transportation purposes, the UPS cabinet is bolted onto a wooden pallet.
Before you start to unpack and unload the UPS, check the TipNTell indicator on the package surface and
the DropNTell indicator on the UPS after unpacking. If the equipment has been correctly transported in the
upright position, the indicator should be intact. If the indicator arrow has turned all blue, contact the
appropriate parties to report inappropriate transportation.
Figure 13. Indicators on the package
1. DropNTell indicator 2. TipNTell indicator
NOTE: Sliding the UPS cabinet from the pallet requires a minimum of two people.
To unload the cabinet from the pallet, complete the following steps.
EATON 93T USER’S AND INSTALLATION GUIDE 614-40270
-
December 2023 www.eaton.eu 3377
To Next Page
Loading...
