5. Turn the four leveling feet counterclockwise. Turn the leveling feet completely up to lift them off of the
pallet.
6. Remove the bolts on both sides that attach the shipping brackets to the cabinet and to the pallet.
NOTE: Before you remove the shipping brackets and move the cabinet away from the pallet, it is recommended that
there is one person behind the cabinet and another person in front of the cabinet holding the cabinet in position. This
is to prevent accidental movement of the cabinet on the pallet.
7. Slowly slide the cabinet onto the ground along the ramp.
8. Move the cabinet to the installation site by using the casters on the bottom.
EATON 93T USER’S AND INSTALLATION GUIDE 614-40270
-
December 2023 www.eaton.eu 4400
To Next Page
Loading...
