Eaton BladeUPS - Technical Specifications; Eaton BladeUPS Specifications

Eaton BladeUPS 5 kVA to 60 kVA (N+1) User’s Guide 164201649—Rev 14 137
CChhaapptteerr 99 SSppeecciiffiiccaattiioonnss
99..11 SSppeecciiffiiccaattiioonnss
This chapter provides the following specifications:
• Model list
• Weights and dimensions
• Electrical input and output
• Environmental and safety
• Battery
Table 20. Model List
UPS Model Number
Power Levels (Rated at Nominal Inputs)
BladeUPS 12 12 kVA or 12 kW at 208V
See Note
BladeUPS 12i
12 kVA or 12 kW at 400V
See Note
BladeUPS 8 8 kVA or 8 kW at 208V
See Note
BladeUPS 5.0 5.0 kVA or 5.0 kW at 208V
See Note
EBM Model Number
BladeUPS EBM
BladeUPS Bar Model Number
BladeUPS Bar 4-High For up to 4 UPSs
BladeUPS Bar 6-High For up to 6 UPSs
NOTE Derated for line cord and nominal line voltage
Cord Model Number
Description Input Plug Type Length (Input/Output)
UPSCord12UL 12 kW UL input IEC 309-60A 3.7m (12 ft)
UPSCord12ULR 12 kW UL input/output IEC 309-60A 1.8/1.2m (6/4 ft)
UPSCordPUL 12 kW UL parallel Anderson
See Note
0.5m (1.5 ft)
UPSCord12CE 12 kW CE input IEC 309-32A 3.7m (12 ft)
UPSCord12CER 12 kW CE input/output IEC 309-32A 1.2/1.2m (4/4 ft)
UPSCord12PCE 12 kW CE parallel Anderson
See Note
0.5m (1.5 ft)
UPSCord8UL 8 kW UL input.output L21-30P
3.05/1.83m (10/6 ft)
UPSCord5UL 5.0 kW UL input/output L21-20P
3.05/1.83m (10/6 ft)
NOTE Customized Anderson connector for use with Eaton BladeUPS Bar