24 Eaton BladeUPS 5 kVA to 60 kVA (N+1) User’s Guide 164201649—Rev 14
Figure 7. Attaching the Ramp to the Pallet
Pallet Front
Pallet Rear
Ramp
Pre-drilled hole
Tee nut
33..77 UUnnllooaaddiinngg tthhee SSyysstteemm
CAUTION
The system is heavy. See Table 1 for system weight. If unloading instructions are not closely followed, the
system can cause serious injury.
CAUTION
Do not tilt system more than 10° sideways from vertical. To unload the system:
Unloading the System
To Next Page
Loading...
