Eaton BladeUPS - Parallel UPS Installation

Eaton BladeUPS 5 kVA to 60 kVA (N+1) User’s Guide 164201649—Rev 14 87
Figure 70. Connecting UPSs to the BladeUPS Bar (Bottom Entry Shown)
Plug Retainer
1
2
3
44..1166 PPaarraalllleell UUPPSS IInnssttaallllaattiioonn
These installation procedures provide the steps to configure the CAN Bridge cards for parallel operation. There
are three types of parallel UPS installation. Follow the applicable procedure for the type of parallel configuration:
Parallel UPS Installation