0 About this manual
0.3 Abbreviations
6 DC1 Frequency Inverter 10/12 MN04020003Z-EN www.eaton.com
0.3 Abbreviations
The following abbreviations are used in this manual.
￫
In order to make it easier to understand some of the figures
included in this manual, the housing of the frequency inverter,
as well as other safety-relevant parts, have been left out. How-
ever, it is important to note that the frequency inverter must
always be operated with its housing placed properly, as well as
with all required safety-relevant parts.
￫
All the specifications in this manual refer to the hardware and
software versions documented in it.
￫
More information on the devices described here can be found
on the Internet under:
http://www.eaton.com/moeller
Support
dec Decimal (base-10 numeral system)
DS Default settings
EMC Electromagnetic compatibility
FE Functional earth
FS Frame Size
FWD Forward run (clockwise rotating field)
GND Ground (0-V-potential)
hex Hexadecimal (base-16 numeral system)
ID
Identifier (unique ID)
IGBT Insulated gate bipolar transistor
LCD Liquid Crystal Display
LSB
Least significant bit
MSB
Most significant bit
PDS
Power Drive System (magnet system)
PE Protective earth
PES EMC connection to PE for screened lines
PNU Parameter number
REV Reverse run (anticlockwise rotation field active)
ro Read Only (read access only)
rw Read/Write (read/write access)
UL Underwriters Laboratories
To Next Page
Loading...
