3 Installation
3.2 Mounting
50 DC1 Frequency Inverter 10/12 MN04020003Z-EN www.eaton.com
3.2.1 Mounting position
DC1 series frequency inverters are designed to be mounted vertically.
The maximum permissible inclination is 30°.
Figure 24: Mounting position
3.2.2 Cooling measures
In order to guarantee sufficient air circulation, enough thermal clearance
must be ensured according to the frame size (rating) of the frequency
inverter.
Figure 25: Space for air-cooling
￫
DC1 series frequency inverters can be mounted side by side
without any lateral clearance between them.
b
c
a
c
a
1234567891011 1234567891011
To Next Page
Loading...
