Eaton DC1-124D1FN-A20N - PC Interface Card; DX-Com-Stick

9 Appendix
9.3 PC interface card
DC1 Frequency Inverter 10/12 MN04020003Z-EN www.eaton.com 171
9.3 PC interface card
9.3.1 DX-COM-STICK
– DX-COM-STICK PC connection module
– Instructional leaflet
– drivesConnect parameter configuration software and driver software
The DX-COM-STICK computer interface module is designed to enable com-
munications between a DC1 series frequency inverter and a computer with a
Windows operating system (point-to-point connection). Together with the
drivesConnect parameter configuration software, you can:
• Upload and download all parameters
• Save parameters and compare them to each other
• Print parameter lists
• Show graphs vs. time with the monitor display function.
You can then save the oscillograms on your computer and print them.
The DX-COM-STICK computer interface module can be installed and con-
nected without tools. DX-COM-STICK is plugged into the front of the DC1
frequency inverter.
Figure 89: Equipment supplied DX-COM-STICK
￫
The DX-COM-STICK PC connection card is not supplied with the
DC1 frequency inverter.