Eaton DC1-124D1FN-A20N - DC1 Device Series; Rating Data on the Nameplate

1 DC1 device series
1.4 Rated data
DC1 frequency inverter 10/12 MN04020003Z-EN www.eaton.com 13
1.4 Rated data
Voltage categories
DC1 frequency inverters are divided into following voltage categories:
• 110 V: DC1-1D…
• 230 V: DC1-12…, DC1-S2…, DC1-32…
• 400 V: DC1-34…
1.4.1 Rating data on the nameplate
The device-specific rated operational data for the DC1 frequency inverter is
listed on the nameplate on the right side of the device.
The inscription of the nameplate has the following meaning (example):
Inscription Meaning
DC1-344D1FB-A20N Part no.:
DC1 = DC1 series frequency inverter
3 = Three-phase mains connection / three-phase motor connection
4 = 400 V mains voltage category
4D1 = 4.1 A rated operational current (4-decimal-1, output current)
F = Integrated radio interference suppression filter
B = Integrated brake chopper
A = LED display (7-segment text display)
20 = IP20 protection type
N = Standard basic device
Input
Power connection rating:
Three-phase AC voltage (U
e
3~ AC),
380 - 480 V voltage, 50/60 Hz frequency, input phase current (5.1 A).
Output
Load side (motor) rating:
Three-phase AC voltage (0 - U
e
), output phase current (4.1 A),
output frequency (0 - 500 Hz)
Power
Assigned motor output:
1.5 kW at 400 V/2 HP at 460 V for a four-pole, internally cooled or surface-cooled
three-phase asynchronous motor (1500 min
-1
at 50 Hz/1800 rpm at 60 Hz)
S/N
Serial number
Frequency inverter is an electrical apparatus.
Read the manual (in this case MN04020003Z-EN) before making any electrical
connections and commissioning.
IP20/Open type
Protection type of the housing: IP 20, UL (cUL) Open type
25072012
Manufacturing date: 25.07.2012
a