Browser commands
10/10 MN05003003Z-EN
60
Description of important Browser commands
canload
Indicates the capacity utilisation of the CANopen fieldbus.
Example:
This browser command returns, for example, the following
information:
• CAN busload = 0 Percent
• Baud rate 125 Kbit/s
• Integration Time: 510 ms
setrtc
Sets or changes the date and/or the time in the controller.
Syntax:
Figure 68: Browser command canload
h
Attention!
With a bus utilization of 75 percent or higher, the warning
ATTENTION: HIGH BUSLOAD also appears. Overload of
the local CAN bus in conjunction with further short term
load peaks can lead to CAN data loss.
h
As well as the browser command, the CAN_BUSLOAD
function can also be used to determine the CAN bus load
from the user program a section “CAN_BUSLOAD
function”on page 62.
<setrtc_YY:MM:DD:DW_HH:MM:SS>
Legend:
_ Space
YY The last two digits of the year (00 F YY F 99)
MM Month (01 F YY F 12)
DD Day (01 F DD F 31)
DW Weekday (01 F DW F 07; 01 = Monday, 07 = Sunday)
HH Hour (00 F HH F 23)
MM Minute (00 F MM F 59)
SS Second (00 F SS F 59)
To Next Page
Loading...
Need help?
General
