2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
17
TRSM0950 Removal | Transmission Removal
Transmission Removal
Special Instructions
Manually Vent Linear Clutch Actuator (LCA).
Special Tools
• Transmission Jack Adapter Plate (RR1067TR)
• 2 cap screws and washers (M10 x 1.5 x 30 mm,
minimum class 8.8)
Component Identification
Procedure – Removal
1. Perform “Manually Vent Linear Clutch Actuator (LCA)”
on page 219.
2. Refer to OEM guidelines for transmission removal.
To Next Page
Loading...
