2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
5
TRSM0950 General Information | Serial Tag Information and Model Nomenclature
Serial Tag Information and Model Nomenclature
Transmission model designation and other transmission identification information are stamped on the serial tag. To identify the
transmission model and serial number, locate the tag on the lower right side of the clutch housing.
When calling for service assistance or parts, have the model and serial numbers handy.
NOTICE: Do not remove or destroy the transmission identification tag.
Model Number
The model number gives basic information about the transmission and is explained below. Use this number when calling for ser-
vice assistance or replacement parts.
Serial Number
The serial number is the sequential identification number of the transmission. Before calling for service assistance, write the
number down as it may be needed.
Gear Ratio Set (A / B / C / D)
E
Eaton
Endurant
Design Level
Units for Torque (F = ft-lb; N = Nm)
X X
F1
Forward Speeds
12 CE
O
-
Overdrive
Torque Capacity
(XX * 100 + 50 ft-lb)
To Next Page
Loading...
