Eaton Endurant - Rear Housing Assembly Removal

2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
51
TRSM0950 Removal | Rear Housing Assembly Removal
Rear Housing Assembly Removal
Special Instructions
WARNING: Rear Housing Assembly weighs approximately
170 lbs. Failure to properly secure and lift the Rear Housing
Assembly may result in major vehicle component damage,
severe injury or death.
Special Tools
• Rear Housing Alignment Pins (RR1090TR)
Component Identification
!
1. Rear Housing Cap Screws (x21) - 16 mm
2. Rear Housing Threaded Cap Screws (x3) - 16 mm
3. 90-Degree Lifting Eyes (x2)
4. Rear Housing
5. Rear Housing Alignment Pins (x2)
1
4
5
2
3