2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
197
TRSM0950 Installation | Rear Housing Installation
Rear Housing Installation
Special Instructions
WARNING: Rear Housing Assembly weighs approximately
170 lbs. Failure to properly secure and lift the Rear Housing
may result in major vehicle component damage, severe
injury or death.
Special Tools
• Gasket Sealant (Loctite 5188)
• Gasket Remover (Loctite SF 7631)
• Rear Housing Alignment Pins (RR1090TR)
Component Identification
1. Rear Housing Cap Screws (x21) - 16 mm
2. Rear Housing Threaded Cap Screws (x3) - 16 mm
3. 90-Degree Lifting Eyes (x2)
4. Rear Housing
5. Rear Housing Alignment Pins (x2)
1
4
5
2
3
To Next Page
Loading...
