2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
3
TRSM0950 General Information | How to Use This Manual
How to Use This Manual
This publication is divided into three sections: General
Information, Service Procedures and Appendix.
General Information
This section contains basic chapters such as Transmission
Overview, How to Use This Manual and Serial Tag and
Model Nomenclature.
Service Procedures
To find the information you need, simply locate the proce-
dure in the Table of Contents, turn to the page specified and
follow the procedure.
The Service Procedures are divided in three sections;
Removal, Disassembly/Assembly and Installation. Removal
instructs how to remove the part or assembly from the
transmission. Disassembly instructs how to take an assem
-
bly apart. Assembly instructs how to put together an
assembly. Installation instructs how to install the part or
assembly in the transmission. Not all parts have a disas
-
sembly/assembly section.
A Component Identification diagram is included at the
beginning of each procedure for Removal, Disassem
-
bly/Assembly and Installation. Below the Component
Identification diagram is a numerical listing for each part
with the part name.
Appendix
This section contains information such as Lubrication
Specifications, Inspection, Tool Specifications, and Torque
Specifications.
To Next Page
Loading...
