Eaton Endurant - Input Shaft Pilot Bearing Wear Sleeve Disassembly;Assembly

2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
81
TRSM0950 Disassembly/Assembly | Input Shaft Pilot Bearing Wear Sleeve Disassembly/Assembly
Input Shaft Pilot Bearing Wear Sleeve Disassembly/Assembly
Special Instructions
None
Special Tools
• Input Shaft Pilot Bearing Wear Sleeve Puller
(RR1062TR)
• Wear Sleeve Installer (RR1061TR)
- Snap Ring Installer (RR1061TR-1)
- Wear Sleeve Driver (RR1061TR-2)
Component Identification
1. Spiral Snap Ring
2. Pilot Bearing Wear Sleeve
3. Wear Sleeve Alignment Pin
4. Input Shaft