2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
117
TRSM0950 Disassembly/Assembly | Rear Housing Assembly Disassembly/Assembly
Rear Housing Assembly Disassembly/Assembly
Special Instructions
WARNING: Rear Housing weighs approximately 170 lbs.
Keep fingers clear of pinch point between Rear Housing and
other surfaces. Dropping Rear Housing may result in major
vehicle component damage, severe injury or death.
Special Tools
• Reaction Plate Alignment Pins (RR1091TR)
• Range Assembly Removal & Installation Tool
(RR1065TR)
• Rear Housing Stand (RR1069TR)
• Input Shaft Bearing Removal and Installation Tool
(RR1075TR)
• Output Bearing Removal and Installation Tool
(RR1089TR)
• Universal Driver Handle (OE8044-T0)
Component Identification
1. Cap Screws and Washers (x4) - 13 mm
2. Range Synchronizer Assembly
3. Planetary Output Shaft Assembly
4. Shift Rail E
5. Reaction Plate Alignment Pins (x2)
6. Rear Housing
7. Rail E Detent
8. Output Bearing
9. Cap Screw (x1) - 8 mm
10. Rear PTO Lube Tube (Dual PTO model only)
1
7
6
8
4
9
10
2
3
5
To Next Page
Loading...
