2019.04.4
© 2018 Eaton Cummins Automated Transmission Technologies. All rights reserved
73
TRSM0950 Removal | Main Shaft and Countershaft Removal
36. Slowly lift Synchronizer Sliding Sleeve up until Syn-
chronizer Rollers are free from synchronizer assembly.
NOTICE: Rollers are under spring pressure, ensure to
slowly lift sleeve so rollers do not eject from the syn
-
chronizer assembly during disassembly.
37. Remove 3 Synchronizer Rollers.
38. Remove 3 Synchronizer Plungers and Springs from
Synchronizer hub.
39. Remove Thrust Washer - Front.
40. Remove Wave Spring - Front.
To Next Page
Loading...
