•
•
•
•
•
•
•
•
Messages
0 xxxxxxxxxxxxxxxxx The limit value of a totaliser has been
exceeded
The name of the totaliser (freely editable)
whose parametrised limit value has been
exceeded is in the system message
---
0 Backup Alarm Config Alarm configuration has been restored from
the backup
Please contact Customer Service
0 Data carrier reinit Data carrier reinitialisation Please contact Customer Service
Data carrier reorg Data carrier reorganisation Please contact Customer Service
Data carrier defective Data carrier defective Please contact Customer Service
0 E-Mail file error Configuration for E-Mail could not be loaded Please contact Customer Service
E-Mail data error The configuration data for E-Mail have errors Please contact Customer Service
E-Mail DNS error The host name of the mail server cannot be
resolved
Check:
network configuration (see
Menu 4-1-5)
E-Mail error: x An error with the error number x has occurred
during the transmission of messages and
alarms via E-Mail.
Please contact Customer Service
E-Mail no network E-Mail connection establishment to the mail
server not possible
Check:
network configuration (see
Menu 4-1-5)
E-Mail send error Error in the E-Mail alarm transmission Check:
network configuration (see
Menu 4-1-5)
E-Mail configuration (see Menu
4-1-7)
E-Mail language definition E-Mail message could not be created Please contact Customer Service
E-Mail SSL error E-Mail SSL error during connection
establishment to the mail server
Check:
network configuration (see
Menu 4-1-5)
E-Mail configuration (see Menu
4-1-7)
E-Mail timeout E-Mail timeout during send Check:
network configuration (see
Menu 4-1-5)
E-Mail configuration (see Menu
4-1-7)
0 EUArchDBWrtFailTN Archiving: error during write of EU data Check EU Logger configuration
EUArchInvalZoneTN Archiving: an incorrect temperature zone is
configured in a logger
Check EU Logger configuration
EUArchMultiLogTN Archiving: multiple loggers have the same
temperature sensor configured
Check EU Logger configuration
EUArchMultSensTN Archiving: a logger has the same temperature
sensor configured multiple times
Check EU Logger configuration
0 Events deleted All alarms and messages with a send
timestamp have been deleted
---
0 Firmware update failed Firmware update has not completed
successfully
Please contact Customer Service
To Next Page
Loading...
Need help?
General
