ECKELMANN VSC 5110 User Manual



Firmware V7.16.x
16.05.2023
169/183
0 internal error 42 4E20
internal error 42 4E21
internal error 42 4E22
internal error 42 4E23
internal error 42 4E24
internal error 42 4E25
internal error 42 4E26
internal error 42 4E27
internal error 42 4E28
internal error 42 4E29
internal error 42 4E2A
Error in alarm signalling module Please contact Customer Service
0 internal error 43 0000 Archiving: Serious error in the archiving of the
operating data
Please contact Customer Service
internal error 43 0001
internal error 43 0002
Archiving: Settings invalid Please contact Customer Service
internal error 43 0003 Archiving: Invalid timestamp Please contact Customer Service
internal error 43 0005
internal error 43 0006
Archiving: Incomplete data check Please contact Customer Service
internal error 43 0004
internal error 43 000A
internal error 43 0100
internal error 43 0200
internal error 43 0201
internal error 43 0202
internal error 43 0203
internal error 43 0204
internal error 43 0205
Archiving: memory error Please contact Customer Service
0 internal error 44 2710 Node management: saved node list could not
be
Please contact Customer Service
internal error 44 2711 Node management: at least one stored CAN
bus node could not be loaded
Please contact Customer Service
internal error 44 2712 Node management: at least one stored
compact controller could not be loaded
Please contact Customer Service
internal error 44 2713 Node management: at least one stored
Danfoss controller could not be loaded
Please contact Customer Service
internal error 44 2714 Node management: stored node list has been
restored
Please contact Customer Service
internal error 44 2715 Node management: at least one temperature
sensor (TS 30 W) stored in the system centre
could not be loaded
Please contact Customer Service
internal error 44 2716 Node management: at least one stored Wurm
controller could not be loaded
Please contact Customer Service
0 internal error 45 2710 GLT configuration could not be loaded Please contact Customer Service
internal error 45 2711 GLT configuration has been restored Please contact Customer Service
0 internal error 47 0001 Data integrity check: error during the
initialisation
Please contact Customer Service
internal error 47 0100
internal error 47 0101
internal error 47 0201
internal error 47 0202
internal error 47 0300
internal error 47 0301
internal error 47 0302
Error in the data integrity check Please contact Customer Service
0 Internal Error: MQTT Error in MQTT module Please contact Customer Service

ECKELMANN VSC 5110 Specifications

General

Brand	ECKELMANN
Model	VSC 5110
Category	Control Unit
Language	English