63
Alert Message: Disable warning’s control messages
Test Instruction: Before start the test, is opening a windows, to show how to
administer the test. There are also recommendations and descriptions of the most
common mistakes to affect the recording and a video demo too (See Demo)
Audio Instructions: Enables the user-mode audio reading
Wireless Footswitch: Turn on the wireless pedal. (See installing the wireless
footswitch)
On VGA: This activate the stimuli-screen when connects a VGA monitor. Overwrite
Camera: Lets you use the system with a single camera (Right / Left) WMI Hardware:
Hardware setup for the technical support only.
Force connect: Communication Protocol
Mask A: select mask type A (hardware)
Mask Nselect mask type N (hardware)
Time out M: Timeout on connection
Wait Filter: Filter video
Render: Enables support for rendering of video depending on the version of Windows
® (XP, 7,
8)
(VRM 0 Video Render/ VRM 9 Video Render/ Window 8 video render:
Analysis
It offers the possibility to adjust the sensitivity of the detection algorithm for each
particular test. (See also Edition of nystagmus)
To Next Page
Loading...
