17
NEW SESSION
The tests performed on a patient are stored in a single session. You can perform
different sessions for the same patient.VNG plus allows you to define the test
protocol, configuring each test as its own characteristics. (See: Configure/Protocols).
The protocol set upped is a user interface that presents a sequence that leads the
user through a series of well-defined step, it allowing you to interrupt or skip tests or
scheduled processes.
To create a session you must complete the following field
:
1. Session: Identify the session with a name. If you want create it an automatic
ID press button.
2. Complete the data Clinic, Doctor, Technical (optional)
3. Select a protocol from the drop down menu (See: Create Protocol)
The button opens the database to set the dropdown menu associated with each
parameter
NOTE: Default protocols are set by the hardware installed
START TESTS
Upon completion of patient data and the session can begin the study from the Start
Session button. VNG Plus will instruct and help step by step in a simple and safe way
to perform scheduled tests
OPENING AN EXISTING FILE
Press Load button and select the patient on the list and open the File.
OPENING AN EXISTING SESSION
For the patient press Load session button and select the session on the list
and open the File
OTHER FUNCTIONS
Report: See the print report
To Next Page
Loading...
