EasyManua.ls Logo

Ecleris VNG Plus - Driver Installation Process

Default Icon
98 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
77
CARE AND MANTEINANCE
WARNING: To reduce the risk of electric shock, turn off and disconnect the
equipment from the power supply before cleaning or repairing it.
NOTE: It is the responsibility of the user to comply with the information provided in
this section
The procedures detailed below must be performed by the operator. For other
maintenance or repair, contact the technical service or an authorized maintenance
representative.
CLEANING
CAUTION: Carry out the cleaning taking great care not to introduce water or humidity
to the equipment or its parts
CONSOLE
CAUTION: Do not use harsh chemicals.
Cleaning the exterior surface of the equipment should be done using a soft damp
cloth that does not drip. Rinse with a clean cloth moistened with water and let it dry
thoroughly before reuse.
RECEIVER BAR
Use a soft cloth to remove dust. In case the dirt is abundant you can go over the outer
surface with a slightly dampened cloth
GOGGLES
Camera lenses and coated mirrors should be cleaned regularly of marks and dust.
These should be cleaned with lens cleaning wipes.
The frame of the glasses should be cleaned with a sterile disposable handkerchief
with a cleaning solution of ethanol (or isopropyl) at 70%
CAUTION: It is recommended to clean the frame every time it is used with different
patients.
Mask straps can be removed and machine washed at 40 ° C with normal washing
detergents. Do not dry in a dryer. Note that the elastic qualities may deteriorate after
more than 10 wash cycles, after which they must be replaced.

Table of Contents

Related product manuals