Ecleris VNG Plus - System Connections; Mask, Junction Box, and Camera Connections; Monitor, PC, and Power Connections

81
single channel (eye). to activate both Channels
The wireless
switch is not
detected or not
working
Missingtoinstall drivers. Install the wireless switch
drivers.
USB wireless receiver is
unplugged.
Plug USB receiver (It is
inside the switch) to a USB
port of the PC.
Function wireless switch
is not activated.
Select the wireless switch
into
Setup/ Advanced /
Acquisition
If you cannot solve the problem, contact your local ECLERIS office or distributor and
request technical services.