Ecolab SMARTPOWER - Page 31

Install the swivel outlet
Personnel:
n
Service Personnel
n
Qualified employee
Protective equipment:
n
Protective gloves
n
Safety shoes
n
Protective eyewear
Material:
n
Petroleum jelly
Requirements
n The unit is mounted in accordance with the regulations.
Legal requirements for the United Kingdom of Great Britain and Northern
Ireland
The spout of the swivel outlet must be at least 30 cm
above the max. fill level
of the container.
1
2
4
5
3
Fig. 5: Install the swivel outlet
1
Product outlet
2
Protective cap
3
Union nut
4
Swivel outlet
5
Aerator
1.
Remove the protective cap
2
and grease the o-rings with petroleum jelly.
2.
Insert the swivel outlet
4
into the product outlet
1
and tighten the union nut
3
by
hand.
Assembly and connection
31 MAN054128 Ver. 01-06.2024