EDAN C3A User Manual

C3A, C6A, C6A HDVideoColposcope User Manual EMC Information
- 107 -
A4.4 Recommended Separation Distances
Recommended separation distances between
portable and mobile RF communications equipment and the
Video Colposcope
The Video Colposcopeis intended for use in an electromagnetic environment in which
radiated RF disturbances are controlled. The customer or the user of
theVideoColposcopecan help prevent electromagnetic interference by maintaining a
minimum distance between portable and mobile RF communications equipment
(transmitters) and the Video Colposcope as recommended below, according to the
maximum output power of the communications equipment.
Rated maximum
output power of
transmitter
(W)
Separation distance according to frequency of transmitter (m)
150 kHz to 80 MHz
Pd 2.1
80 MHz to 800 MHz
Pd 2.1
800 MHz to 2.7GHz
Pd 3.2
0.01
0.12
0.12
0.23
0.1
0.38
0.38
0.73
1
1.2
1.2
2.3
10
3.8
3.8
7.3
100
12
12
23
For transmitters rated at a maximum output power not listed above, the recommended
separation distance d in meters (m) can be estimated using the equation applicable to the
frequency of the transmitter, where P is the maximum output power rating of the
transmitter in watts (W) according to the transmitter manufacturer.
NOTE 1: At 80 MHz and 800 MHz, the separation distance for the higher frequency
range applies.
NOTE 2: These guidelines may not apply in all situations. Electromagnetic propagation is
affected by absorption and reflection from structures, objects and people.
NOTE:
The video colposcopes above include C3A, C6A and C6A HD.

EDAN C3A Specifications

General

Brand	EDAN
Model	C3A
Category	Medical Equipment
Language	English