EDAN C3A User Manual

C3A, C6A, C6A HDVideoColposcope User ManualApplication of the Video Colposcope Software
- 83 -
5.12.2.12 Switching Positions of R-way Evaluation and RCI Evaluation
You can switch the position of the R-way Evaluation tab with that of the RCI Evaluation tab on
the Analysis interface.
1) Click the Setupbutton to open the Setupinterface.
2) On the General Setuptab,selectSwitch R-way with RCI in the Others area.
3) Click OK.
4) Exit the system and restart the software immediately.
5.12.2.13 Enabling RCI Evaluation
1) Click the Setupbutton to open the Setupinterface.
2) On the General Setuptab,selectRCI Evaluationin the Others area.
3) Click OK.
4) Exit the system and restart the software immediately.
NOTE:
1. RCI Evaluation is selected by default. You can deselect it to disable the function.
2. The RCI evaluation is not available in the United States.
5.12.2.14 Enabling Swede Evaluation
1) Click the Setupbutton to open the Setupinterface.
2) On the General Setuptab,selectSwede Evaluationin the Others area.
3) Click OK.
4) Exit the system and restart the software immediately.
NOTE:
The Swede evaluation is not available in the United States.
5.12.2.15 Enabling Examination Prompts
1) Click the Setupbutton to open the Setupinterface.

EDAN C3A Specifications

General

Brand	EDAN
Model	C3A
Category	Medical Equipment
Language	English