EDAN C3A - Making an Appointment

C3A, C6A, C6A HDVideoColposcope User ManualApplication of the Video Colposcope Software
- 39 -
shows today's exam schedule again. Or you can click Start, this patient is added to today's exam
schedule and the system enters the Examine interface. You can click Clear to delete the inputted
information.
Figure 5-11
5.3.7 Making an Appointment
You can make an appointment for a patient after this function is enabled (see section
5.12.2.10Enabling Patient Appointment).
Figure 5-12
Click the Appointment tag to open the Appointment interface. Input
information such as patient name, age and appointment time on the Patient Info.tab and
indications on the Indications for Colposcopy tab, then click Save.The appointment is made,
and the patient's information is shown in the appointment list below.
The appointment time can be the current day or a future day. If the user type of the doctor login is
nurse, the system will move the patients whose appointment time is the current day to Today's
exam schedule; if the user type of the doctor login is not nurse, the system will move the patients
whose appointment time is the current day to Today's exam schedule only when the appointed
physician is the doctor login or not specified.