C3A, C6A, C6A HDVideoColposcope User ManualBasic Operations
- 19 -
Chapter 3 Basic Operations
3.1 Opening and Checking the Package
Visually examine the package prior to unpacking. If any signs of mishandling or damage are
detected, contact the carrier to claim for damage.
Open the package and check the components according to the packing list.Inspect the
components for any damage. Let the service engineer of the manufacturer assemble the system
for you.
Keep the package for possible future transportation or storage.
3.2 Adjusting the Vertical Stand
3.2.1 Placing/Moving the Stand
Each stand caster has a pedal. Step down the pedal can lock the caster.
When the stand is placed somewhere, step down the pedals to lock the casters and stop the stand
from moving around.
When you need to move the stand, hold the lifting post with your hand and then push up the
pedalsto release the casters. After you move the stand to the destination, step down the pedals
again.
CAUTION
Do not move the stand by holding the camera handle, otherwise the camera may be
damaged.
Figure 3-1
Push up to
release the caster
Step down to
lock the caster
To Next Page
Loading...
Need help?
General
