EDAN C3A - Selecting a Print Template; Exporting the Report

C3A, C6A, C6A HDVideoColposcope User ManualApplication of the Video Colposcope Software
- 65 -
Select a print template, a printer and the size of printing paper (A4 or B5), specify the number of
copies,and click OK to save the settings.
Under Print Template, if you select a template other than Custom,the default print settings are
used and print itemsare unavailable for selection. If you select Custom, the print items are
available for selection,andyou can select them as desired. The selected items will be shown on the
report. You can click the Restore Factory Config button under Print Patient Info.andPrint
Content to restore to the default settings. (By default, the 4-image print template is used.)
NOTE:
Whichever print template is selected, you can set the color of hospital name and hospital
second name, or define the report title. The color setting and report title applies to all print
templates.
5.6.3 Selecting a Print Template
Five standard print templates are available: 1-image template, 2-image template, 3-image
template, 4-image template and 6-image template. These five templates contain the same print
items, except for the number of images.
You can select a print template on the Setup page, or you can quickly select the print template by
clicking the , , , , or
tag on the left of the Report interface. The examination report is then displayed
in the corresponding template.
You can also click the tag. The examination report is then displayed in the
template that you have customized on the Setup page.
5.6.4 Exporting the Report
The examination report can be exported to a .pdfand a .dcmfile.
On the Report interface, click theExporttag on the left, select a directory and
then click Save.The report is exported to the target directory.
NOTE:
The Export tag is shown on the Report interface only after you select Export on the
General Setup tab (see section 5.12.2.7Enabling the Report Export Function).