C3A, C6A, C6A HDVideoColposcope User ManualApplication of the Video Colposcope Software
- 43 -
5.4 Examining
Once a patient is selected on the Patient Info.interface, click Starton the interface or the
Examinebutton in the tool bar.The system enters the Examine interface, with the
patient's key information displayed on the lower left.On this interface, you can capture images,
take video,make comparison, edit or measure the images.
NOTE:
1. You can open the Examine interface only after the camera is connected to the
computer and switched on.
2. If no image is displayed, check whether the USB connection between the computer
and the video capture box is normal.
5.4.1 Examination Prompts
If the function of providing examination prompts is enabled (see section 5.12.2.15Enabling
Examination Prompts), prompts are available when you open the Examine interface. You can
also click the Help tag and view examination guide on the displayed Help page.
Figure 5-15
5.4.2 Capturing Images
Click the Auto Capturetag , the auto capture function is enabled (which is
To Next Page
Loading...
