Chapter 28
| Domain Name Service Commands
– 875 –
â—† If one or more name servers are configured, but DNS is not yet enabled and the
switch receives a DHCP packet containing a DNS field with a list of DNS servers,
then the switch will automatically enabled DNS host name-to-address
translation.
â—† If all name servers are deleted, DNS will automatically be disabled.
Example
This example enables DNS and then displays the configuration.
Console(config)#ip domain-lookup
Console(config)#end
Console#show dns
Domain Lookup Status:
DNS Enabled
Default Domain Name:
sample.com
Domain Name List:
sample.com.jp
sample.com.uk
Name Server List:
192.168.1.55
10.1.0.55
Console#
Related Commands
ip domain-name (875)
ip name-server (877)
ip domain-name This command defines the default domain name appended to incomplete host
names (i.e., host names passed from a client that are not formatted with dotted
notation). Use the no form to remove the current domain name.
Syntax
ip domain-name name
no ip domain-name
name - Name of the host. Do not include the initial dot that separates the
host name from the domain name. (Range: 1-127 characters)
Default Setting
None
Command Mode
Global Configuration
Example
Console(config)#ip domain-name sample.com
Console(config)#end
To Next Page
Loading...
Need help?
General