Alarm Centre
Alarm centre interface is shown as below.
This interface is for you to develop. The alarm signal can be uploaded to the alarm centre when there is
local alarm.
Please set the corresponding parameters such as server IP, port and etc.
The system can send out the data as the protocol defined to the client-end.
Figure 7-37
7.3.2.6 Alarm
The ED-DVR12004 does not support alarm function.
Alarm setup interface is shown as in X467H467H467HFigure 7-38X.
Please make sure you have connected the corresponding alarm output device such as the light, buzzer
and etc.
To Next Page
Loading...
