Edimax BR-6475nD - Page 37

36
Access youtodoso.

NOTE:ThesesettingsmustbeconfiguredaccordingtoyourInternetservice.Please
contactyourInternetserviceproviderifyouarenotsurewhat to select.

3. Configurethe“L2TPSettings”section.



ItemName Description
UserID InputtheusernameassignedbyyourISPhere.
Password InputthepasswordassignedbyyourISPhere.
L2TPGateway InputtheL2TPgatewayassignedbyyourISPhere.
MTU InputtheMTUvalueofyournetworkconnectionhere.Ifyou
donotknow,usethedefaultvalue.
ConnectionType Pleasespecifyaconnectiontypehere.Thereare3options:

1. “Continuous”keepstheInternetconnectionaliveallthe
time.
2. “ConnectonDemand”onlyconnectstotheInternetwhen
youinitiateInternetconnection.
3. “Manual”connectstotheInternetonlywhenthe
“Connect”buttononthispageis
clicked,anddisconnects
whenthe“Disconnect”buttonisclicked.
IdleTimeOut Specifytheamountoftimetherouterwaitsbeforeshutting
downanidleconnection.Thisoptionisonlyavailablewhen
“ConnectonDemand”isselected.

4. Click“OK”tocompletesetup.




