Edimax BR-6475nD - Station-Infrastructure

89
3‐5‐1‐2Station‐Infrastructure

In“Station‐Infrastructure”mode,therouteractsasbothawirelesscom munication
clientandawirelesscommunic ationserver.Thefollowingsettingswillappearin
station‐infrastructuremode:



ItemName Description
Band Selectfro moneofthefollowingoptions:

5GHz(A):Allows802.11awirelessnetworkclientsto
connecttothisrouter.

5GHz(N):Allows802.11nwirelessnetworkclientsto
connecttothisrouter(maximumtransferrate
300Mbps).

5GHz(A+N):Allows802.11aand802.11nwireless
networkclientstoconnecttothisrouter
(recommended).

ESSID Thisisthenameofyourrouter.Youcantypeany
alphanumericalcharacterhere(maximum32
characters).
SiteSurvey Click“SelectSiteSurvey”andapop‐upwindowwill
appear.Allreachablewirelessaccesspointswillbe
showninthewindow.Selectawirelessaccesspoint
fromthelist,andclick“Done”toestablisha
connection.Clicking“Refresh”willrenewthelist.
WirelessModule Select“Enable”toturnonthe5GHzwirelesssignal
andselect“Disable”toturnitoff. 
