Edimax BR-6475nD - Dynamic; Dynamic IP 4

49
3‐2‐1DynamicIP

IfyourInternetserviceproviderassignsIPaddressestoyouautomaticallythrough
DHCP(DynamicHostConfigurationProtocol),select“DynamicIP”.



ItemName Description
HostName Inputthehostnameofyourcomputerhere.Thisisoptional
andonlyrequiredifyourISPasksyoutodoso.
MACAddress IfyourISPonlypermitscomputerswithcertainMAC
addressestoaccesstheInternet,inputyourcomputer’sMAC
addresshere.Press“CloneMacaddress”tofilltheMAC
addressfieldwithyourcomputer’sMACaddress
automatically.
DNSAddress Select“UsethefollowingIPaddress” ifyourISPrequiresthat
youdoso.
DNSAddress1
and2
EntertheprimaryandsecondaryDNSaddressesassignedby
yourISPhere.
TTL Enablethe“TTL”functionifyourISPrequiresyoutodoso.

Click“Apply”tosavethechanges.Afteryouhaveclicked“Apply”,youwillseethe
followingmessage:



Click“Apply”tosavethechangesandrestartthebroadbandrouter.Ittakesabout60
secondsforthebroadba ndroutertorestart.Click“Continue”toconfigureothersettings.
