Edwards APG200 User Manual

Figure 3 Item number matrix
D
Filament/pressure range
Setpoint
Flange
Connector
Voltage output
Other
1 : 1x10 or 5x10 mbar to 1000 mbar (model dependent)
2 : 1x10 or 5x10 t
o 1000 mbar (mod
el dependent)
3 : 1x10 or 5x10 mbar to 1000 mbar (model dependent)
0 : Transistor setpoint
2 : 2 solid state relay setpoint
1 : NW16 flange
2 : NW25 flange
1 : RJ45 connector
0 : 2.0 V to 9.0 V log linear with pressure
0 : No additional features
C : supplied with calibration certificate
3 : 2.2 V to 8.5 V log linear with pressure
2 : 1.9 V to 10.0 V log linear with pressure
4 : 1.875 V to 8.875 V log linear with pressure
5 : 2.0 to 10.0 V non linear with pressure
2 : 9 pin D - subminiature (male)
5 : 1/8” NPT (male)
6 : Swagelok 4VCR fitting (female)
7 : Swagelok 8VCR fitting (female)
8 : 1/2” OD tube
9 : DN16 conflat flange
(Corrosion resistant filament)
(Corrosion resistant filament)
1 G 2 2 2 1 2 0 C
-3
-4
-3 -4
-4
-4
07/2021 - ©Edwards Limited
Page 11D1G0000880_A
D1G0000880_A - Intr
oducon

Edwards APG200 Specifications

General

Brand	Edwards
Model	APG200
Category	Medical Equipment
Language	English