44 Installation and Service Guide
Using the E-35A
• Reboot System (hard reset)—Shuts down all E-35A activity properly and then reboots. Network access to the E-35A
is temporarily interrupted and all currently processing jobs are aborted and may be lost.
• Shut Down—Shuts down all E-35A server software and powers off the system. You should always select this option
when you want to power off the system. Network access to the E-35A is terminated and all currently processing
jobs are aborted and may be lost.
Note: Use the reset button on the front of the E-35A only if the system is unresponsive to keyboard or mouse actions.
5 Press OK.
Before accessing internal components, make sure that all cables are disconnected from the back of the E-35A.
To Next Page
Loading...
