Printer Setup
Document ID: OMM-00165 Rev. C Pro 32r Operations Guide 97
5.5.1.2 Manager: Managing Users and Passwords
The management of users and passwords is carried out through the Operator Manager in the Tools menu. Adding or
removing users is password protected. To set or change a password, you have to know the old password.
NOTE: The initial software password is 1234
5.5.1.3 Adding or removing a user
1. Choose Tools > Operator > Operator Manager.
Add
Remove
Figure 5-26 : Operator Manager
2. Enter the Administrator’s password and choose OK.
3. To remove a user, select the user and choose Remove (–).
4. Choose Yes to remove or No to cancel.
To Next Page
Loading...
