Elcometer 500 - 20.2 ULTRASONIC COUPLANT

20 SPARES & ACCESSORIES (continued)
f
Epoxy coatings, thickness on other materials may vary.
www.elcometer.com
en-32
R
Probe Type
f
Measuring Range
Accuracy
Part Number
C1
0.15 - 2.50mm
(6 - 98mils)
±2% or ±0.01mm
(±2% or 0.4mils)
T500-C1
C2
0.75 - 10mm
(30 - 390mils)
T500-C2
C1
Replacement Probe Tip; Pack of 2
T50027602-1
C2
Replacement Probe Tip; Pack of 2
T50027602-2
C1 / C2
Probe Tip Oil; 4ml (0.14fl oz) Bottle
T50027604
C1
Foil Set: 1 & 2mm (40 & 80mils)
T99022255-13
C1
Foil Set - Certified: 1 & 2mm (40 & 80mils)
T99022255-13C
C2
Foil Set: 3 & 8mm (120 & 310mils)
T99022255-14
C2
Foil Set - Certified: 3 & 8mm (120 & 310mils)
T99022255-14C
Note: A Material Safety Data Sheet for the probe tip oil supplied by Elcometer is available
to download via our website:
www.elcometer.com/images/stories/MSDS/Elcometer_Probe_Tip_Oil.pdf
20.2 ULTRASONIC COUPLANT
For the gauge to work correctly, there must
be no air gap between the probe and the test
surface. This is achieved by using a small
amount of couplant.
A 120ml (4fl oz) bottle of couplant is supplied
as standard with each gauge, other sizes are
available to purchase separately.
Description Part Number
Ultrasonic Couplant; 120ml (4fl oz) T92015701
Ultrasonic Couplant; 300ml (10fl oz) T92024034-7
Ultrasonic Couplant; 500ml (17fl oz) T92024034-8
Ultrasonic Couplant; 3.8l (1 US Gallon) T92024034-3
Ultrasonic Couplant - High Temperature; 60ml (2fl oz) T92024034-9
(for use in warm environments)
Note: Material Safety Data Sheets for the ultrasonic couplant supplied by Elcometer are
available to download via our website:
www.elcometer.com/images/stories/MSDS/Elcometer_Ultrasonic_Couplant_Blue.pdf
www.elcometer.com/images/stories/MSDS/elcometer_ultrasonic_couplant_hi_temp.pdf