This instruction manual briefly explains the feature of Image Mate 4, downloading/installation
procedure of the instruction manual of Image Mate 4, and the menu items.
For further details, refer to the instruction manual of Image Mate 4.
4-1 INSTALLING IMAGE MATE 4
■INSTALLATION PROCEDURE
1．Access the following Elmo official website.
http://www.elmousa.com/TX-1
www.elmoeurope.com/download
2．Select “Image Mate 4”.
3．Click “Download” and read the “Precautions on the handling of the downloaded data”.
Click “Agree”
4．Downloading will start after a short while.
※If you cannot find the downloaded file, check the download folder of your computer.
5．Run “ImageMate4Setup.msi“ after the downloading is completed. Follow the instructions
displayed in the installation window of Image Mate 4.
6．The icons ｢ ｣ and ｢ ｣ will be created on the desktop after the installation is
completed.
※Advanced WiFi settings can be configured using the Image Mate 4 Setting tool.
Refer to the instruction manual of Image Mate 4 for details of the Setting tool.
To Next Page
