9
HANDLING PRECAUTIONS
The followings are special precautions against mishandling of the product, which may cause
serious damages to the product. Pay close attention to them.
⑤Camera head
Make sure to return the camera head to the
initial position before moving
the camera head.
Otherwise, the camera
head could be damaged.
①Installation
Do not place the product on an unstable place or
slanted surface.
②Carrying the product
Carry the product by holding the lower
part of the main unit in both hands.
Be careful not to give an impact to
the column or the camera head.
④Cabling of the AC adapter
Do not wrap the power cable tightly around the
AC adapter. By doing so may cause cable
disconnection.
③Zoom operation
Rotate the zoom dial gently. Otherwise the zoom
dial may be broken.
To Next Page
Loading...
