43
6．Disconnect the USB cable after the copy is completed.
7．When the Power LED starts to flash quickly between red and blue, the firmware update
starts.
※The update takes several minutes.
(The TX-1 restarts several times during the update process.)
8．The update is complete when the Power LED turns blue.
※Check whether the firmware has been successfully updated to the latest version by going
to: “Information” “Version”.
6-5 CHANGING SSID AND KEY
It is recommended that you change your SSID and Key to avoid other people from using your
connection without permission.
Arbitrary SSID and Key can be set using the Setting tool.
Changed SSID and Key can be reset to factory default setting using the “Reset all” in the OSD
menu.
［ MENU］＞［ Settings］＞［ Reset］＞［Network settings］
For details of the initialization procedure and changing procedure of the SSID and KEY using
the Setting tool, refer to the instruction manual of Image Mate 4.
To Next Page
Loading...
