E-ESD3000-E-Manual.doc 63/66
Manufacturer Declaration Of Conformity EMC
Directive 89/336/EWG with table VII 2004/108/EG
The EMC Tester
Type: ESD3000; S/N > 10
is designed and manufactured complying with the following harmonised standards:
has been tested in accordance with the following standards:
harmonised:
EN 61000-6-3: 2007
EN 61326: 2006
international
IEC 61000-6-3
IEC 61326-1
Fulfilling the directions of the EMC - Directive 89/336/EWG and with table VII 2004/108/EG
EMC PARTNER authorised representative established within the EC Community
H+H High Voltage
Technology GmbH
Im kurzen Busch 15
DE - 58640 Iserlohn
Laufen: 04. August 2009
EMC PARTNER AG
M. Lutz
Managing Director
EMC PARTNER AG
R. Henz
Manager Quality Department
Appendix to 14.2.2 K Conformity declaration with the EMC directive
To Next Page
Loading...
