Section
1-1
1 Introduction
How to Use this Manual . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1
Safety Messages . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . page 1-1
HOW TO USE
THIS MANUAL
This manual provides installation, configuration, troubleshooting, and
other procedures for the use of the Rosemount Model 8800C Smart
Vortex Flowmeter. Specifications and other important information are
also included.
Section 2: Installation
provides assistance in hardware configuration and lists the options
available to customers for the Model 8800C.
Section 3: Operation
describes the Model 8800C software functions, configuration
parameters, and other online variables. The descriptions are provided
according to the function you want to perform.
Section 4: Hardware and Software Maintenance and Troubleshooting
supplies troubleshooting tables to lead you through any problems that
may arise in the use of the Model 8800C. There are also instructions on
basic maintenance of your Model 8800C.
Appendix A: Reference Data
gives reference and specification data for the Model 8800C and its
applications.
Appendix B: Approvals
shows accompanying drawings for the Model 8800C FM and CSA
approvals and certifications.
Appendix C: HART Communicator
provides command tree, and Fast Key Sequence tables for the HART
Communicator when used in conjunction with the Model 8800C.
Appendix D: Model 268 Communicator
supplies command tree, and Fast Key Sequence tables for the Model
268, when used in conjunction with the Model 8800C.
Appendix E: Electronics Verification
provides a short procedure for verification of electronic output to
assist in meeting the quality standards for ISO 9000 certified
manufacturing processes.
SAFETY MESSAGES Procedures and instructions in this manual may require special
precautions to ensure the safety of the personnel performing the
operations. Refer to the safety messages, listed at the beginning
of each section, before performing any operations.
To Next Page
Loading...
Need help?
General
